Metal roof repair in Jacksonville usually means finding where water gets past a joint. Panels themselves rarely fail. Screws, sealant, flashings and pipe boots do, especially after years of sun and a few storms.
Where Metal Roofs Leak
- Exposed screws: washers dry out and crack, or screws back out as the panels move with heat.
- Pipe boots: rubber boots around plumbing vents split in the sun.
- Flashings: where the roof meets a wall, chimney or skylight, and in valleys.
- Ridge and hip caps: closures and sealant under the caps.
- Storm damage: lifted panel edges, bent trim, or debris punctures after high wind.
What to Do About an Active Leak
Put a bucket under the drip, move what you can, and photograph the ceiling and the roof from the ground. Don't climb onto a wet metal roof. Call (904) 720-8470 and we'll connect you with a licensed roofing contractor.
Repair or Replace
If the panels are sound and the problem is screws, boots or flashings, repair usually makes sense. On an older 5V crimp roof, replacing the screws is the standard fix once the washers fail. If panels are rusted through or the roof leaks in several places, get a replacement price too and compare. Ask the contractor to photograph what they find.
Permits for Repairs
A full re-roof needs a City of Jacksonville permit. Ask whether your repair needs one too, and expect the roofing contractor to pull it. Florida treats unlicensed contracting as a crime, and a felony during a declared state of emergency, so be wary of anyone offering roof work without a license after a storm.
Need metal roof repair in Jacksonville today? Call (904) 720-8470. Replacing instead? Compare standing seam and metal shingle roofs in Jacksonville, or start with a metal roofer in Jacksonville.
Sources: City of Jacksonville Building Inspection Division, Florida DBPR license search, McElroy Metal (2021, 2024).