Metal shingle roofs in Jacksonville are the premium end of metal roofing. Each shingle is a stamped steel (or aluminum) piece shaped like slate, cedar shake, a dimensional asphalt shingle or a barrel tile, finished in a baked-on paint. The pieces interlock on all four sides and are nailed through a hidden top edge, so there are no screw heads on the face of the roof.
How a Metal Shingle System Goes On
The old roof comes off down to the deck. The contractor re-nails the deck to current code, lays a synthetic underlayment, and installs metal starter strips, drip edge and rake trim. Shingles go on in staggered courses from the eaves up, each one hooking into the course below. Ridge caps, hip caps, valley metal and pipe-boot flashings finish it.
The better products are sold as a complete system: the shingles, trim, ridge caps, flashings and sometimes the underlayment all come from one maker and are tested together. Some makers sell only through their own installation crews, which puts the product and the labor under one warranty.
Wind Ratings and Weight
Metal shingles are tested for uplift by standards such as UL 1897, and their Florida Product Approval lists the design pressures and installation they're approved for. Treat the approval, not a wind speed in a brochure, as the real rating, and make sure it covers the wind speed at your address.
They're light. Spec sheets we checked put steel shingles around 94 pounds per 100 square feet of roof and aluminum around 40, against roughly 200 for architectural asphalt shingles and 720 to 970 for concrete tile.
Why Jacksonville Homeowners Choose Them
- They don't look like metal. In a subdivision where the HOA reviews roofs, slate or shingle profiles often get a different answer than ribbed panels.
- No exposed fasteners. Nothing on the face of the roof needs re-screwing later.
- They can replace tile. Light enough to go on a house built for tile without new framing.
- Color holds. Kynar or similar PVDF paints keep their color in Florida sun far longer than asphalt granules.
What to Ask Before You Sign
- What's the Florida Product Approval number for the shingle, and what wind speed and roof height is it approved for?
- Does the warranty cover leaks, or only the paint finish? Who honors it: the maker, the installer, or both?
- Does the warranty transfer if you sell the house, and does it change within a set distance of salt water?
- Is the contractor trained or certified by the shingle's maker?
Metal Shingle Roof Cost in Jacksonville
HomeGuide's national averages put metal shingles at $6–$14 per square foot installed. Premium systems sold and installed by the maker's own crews tend to sit at the top of that range. See metal roof cost in Jacksonville for the full breakdown.
Compare metal shingle roofs in Jacksonville with panels in metal shingles vs standing seam vs 5V crimp, or call (904) 720-8470 for a metal roofer in Jacksonville.
Sources: Florida Product Approval search, HomeGuide metal roof cost, manufacturer specification sheets.